If one of the following error codes is displayed on the 'LED flashes alternately between the letter (E), then (Number) followed by another (Number)), please press the / button to clear the error, repeat steps 1 and 2. Make sure the Wi-Fi light (blue) on the printer is also on.When after the wireless connection is complete, the LED lights up for about 3 seconds, then changes to '1'.

The Wi-Fi light (blue) on the printer will blink when searching / connecting to an access point) Ensure that the gray LED looks like it is on, then press the (WPS) button on your access point within 2 minutes.(For exact details on pressing the WPS button, please refer to the access point manual.Please press / hold the button on the printer for about 5 seconds.Make sure that the printer is turned on, If the power is on (LED / Light Emitting Diode lights up) Make sure that your network must use the security protocol WPA / Wi-Fi Protected Access or WPA2, this is sometimes as a WPS-enabled access point using this protocol.Be sure to check with your device's user manual for details, and if the WPS push button is not available, please use the instructions in the Standard Connection Methods section Access point must have a physical WPS push button.Make sure that before starting, follow some conditions that must be met to use the WPS push button method: If your access point does not support WPS, you should be able to select. Canon PIXMA MP495 Printer Wireless Connection Setup | MP Series provides an easy connection to complete office workloads, with some access points / routers or hubs featuring an automatically connect button labeled MP495 Wi-Fi Protected Setup allows users to be comfortable when devices are allowed to connect to your network without having to enter password, it also offers you very easy to connect PIXMA Printers, when the access point has a WPS button, select below for instructions on connecting MP495 Wi-Fi Setup using this method.

Canon mp495 wireless setup download